MPS-F Heater

Moisture Proof Strip Heater with Integrated Aluminum Heat Sink

These heating elements are based on our Moisture Proof Strip Heaters with temperature reducing heat sinks applied to reduce the effective watts per square inch and provide lower skin temperatures.

The heat sink is an aluminum extrusion mechanically adapted to the heater for a tight fit and uniform dissipation of heat.

  • Heat sinks are offered with raised fins for maximum surface and air flow
  • Extruded to a maximum of 3.25 inches

MPS-F Heater

Approvals & Certifications

All our manufactured heater elements are presently CSA and/or NRTCUL approved and/or CE certified. Our products are manufactured and controlled by our internal Quality Management System. This program allows TriVolt to track the quality of every component that make up our products and monitors the workmanship of every electrical heater and sensor manufactured and assembled in our facility.

CSA Std.C22.2. no 72-M1984
UL Standard 1030 6th Edition
EN 60335-1:2004
Shock and Vibration: IEC 61373; Category 1; Class B
CAN/CSA-C22.2 No. 72-10 (2013)
UL 499 Thirteenth Editions; Class 2871-02 and 2871-82.

TriVolt Industries can also comply with any customer specifications such as “Buy America”. Our facility in Westfield, MA, USA lends itself to perform final assembly of heaters and systems to accommodate any Buy-America content requirement.

We can also generate special test conditions with specific set-ups, use computer models to design or isolate problem areas.

We are continuously improving our manufacture methods and products through testing, research and development. Our high standards extend beyond our product line.