Energy

Ceramic Band HT-1200


Trivolt Industries Ceramic Band heaters are specifically designed for high operating temperature applications, typically 1200° to 1400° F. (See image below.)

Ceramic Bands are manufactured with a stainless steel cover and are high temperature fiber insulated to prevent heat loss thereby increasing their efficiency and reducing operating costs.

The interlocking ceramic sections make these heaters flexible with good thermal conductivity and less prone to expansion problems.

This flexibility makes it less critical fitting around a barrel versus a mica band style heater and easier to install while affording a long functional life span.

HT1200 Ceramic Band heaters can be manufactured in any voltage, wattage, single or three phase and various diameters. We recommend a maximum width of 6” and a maximum watt density of 35 watts per sq.in.

We offer a multiple selection of terminal boxes in any heater location required and can include high temperature connection wire to any length.

Trivolt Industries adopts a stringent internal quality control system (QMSM-2009). Every heater is tested for resistance and dielectric. All our heaters are CSA, UL and CE approved.

  • Specifications
  • Construction
  • Electrical Connections
  • Terminal Housing
  • Clamping Methods
  • Maximum watts per square inches are determined by the diameter, width and application.
  • Manufactured with steatite ceramics
  • Temperature (HT)
  • HT Ceramic heaters are coiled with Kanthal® A1 wire
  • Operating temperature for HT is 1200° F up to a maximum of 1400° F.
  • 1- or 2-piece construction
  • Exterior cover: 24 gauge 3042b stainless steel
  • Recommended maximum width: 6”
  • Thickness: 0.5”
  • Regular gap: 0.375”
  • Post terminal
  • Metal braid (SS)
  • Armour cable (AC)
  • Ground post
  • Dual voltage
  • Single Phase
  • Three Phase
  • Terminal box
  • Terminal box with ceramic block
  • Standard 10-32 barrel nut construction
  • Spring-loaded 10-32 barrel nut
  • Spring loaded latch and trunion

TriVolt-Ceramic-Latch-heater

Ceramic Band HT-1200

Approvals & Certifications

All our manufactured heater elements are presently CSA and/or NRTCUL approved and/or CE certified. Our products are manufactured and controlled by our internal Quality Management System. This program allows TriVolt to track the quality of every component that make up our products and monitors the workmanship of every electrical heater and sensor manufactured and assembled in our facility.

CSA Std.C22.2. no 72-M1984
UL Standard 1030 6th Edition
EN 60335-1:2004
Shock and Vibration: IEC 61373; Category 1; Class B
CAN/CSA-C22.2 No. 72-10 (2013)
UL 499 Thirteenth Editions; Class 2871-02 and 2871-82.

TriVolt Industries can also comply with any customer specifications such as “Buy America”. Our facility in Westfield, MA, USA lends itself to perform final assembly of heaters and systems to accommodate any Buy-America content requirement.

We can also generate special test conditions with specific set-ups, use computer models to design or isolate problem areas.

We are continuously improving our manufacture methods and products through testing, research and development. Our high standards extend beyond our product line.